WebMail 
“Tool Path” Drive Method in NX CAM
Today I will demonstrate practical way of using Tool Path drive method in NX CAM. Read More »
Author Archives: Marek Pawlus
About Marek Pawlus
Marek’s focus is development of postprocessors, NC code simulation kits and NX Open applications for NX CAM. In 2016 Marek founded NCmatic in Poland to provide services for NX CAM users. In 2017 NCmatic became Siemens’ Software and Technology Partner. In 2018 Marek launched second location of NCmatic in Morgan Hill, California, to make it even easier for companies from United States to cooperate with NCmatic. Marek graduated from University of Technology in Rzeszow, Poland in 2010 with master’s degree in Mechanics and Mechanical Engineering. While Marek’s area of interest is CAM software and CNC controllers, he also has hands-on experience as CAM programmer in motorsport industry.
Engraving methods in NX CAM
Today, I will demonstrate two ways of creating engraving operations in NX CAM. Read More »
Cutter compensation output from NX CAM
Today I will discuss very fundamental topic, which is: using cutter compensation in NX. Read More »
Generic Motion operation in NX
After vacation break, I’m back with new Technical Tuesday episode. Today I’m showing an example of what we can do using Generic Motion operation. Read More »
Different ways of programming mill-turn machine (part 1)
With mill-turn machines we usually have more than one way to program an operation. I will show how we can choose which programming mode should be outputted from NX CAM. Read More »
NCreports – easily generate advanced summary of your CAM project!
NCreports is a modern, advanced and very handy tool which allows you to generate various type of reports. Major report type, are: Setup Sheets, Tool Lists and Operation Lists. New types of reports can be added upon request. Below, you can find entire walkthrough on all options of NCreports. Read More »
Application to organize and rename CAM operations and groups
This week I would like to present one of applications which will be available within NCmatic Toolkit for NX. Read More »
How to use Rotate UDE in NX
Today I will present an example of most common use case for Rotate UDE in NX. Read More »
3D solid tool in NX – an easy way (part 2)
Last week, I presented manual way of adding 3D solid tool to NX. Today, I will show easier way of doing this, which can be used in most cases. Read More »
Creating and using 3D solid tool in NX (part 1)
Very common request from NX CAM users is possibility to use 3D solid tool assemblies, which are provided by tool vendors. Here you will find answers how you can do it with NX. Read More »