Our main focus is to provide the best quality NX CAM postprocessors for all kinds of machines. Although NCmatic is a startup company, we have many years of experience in implementing the most difficult post processor and simulation projects in diverse production areas.
From simple 3-axis vertical mill to 5 axis simultaneous (5 axis mill or B axis style/multi turret lathe) we can handle any postprocessor or simulation requirement.
Such advanced, well customized and tested postprocessor, with reliable machine tool simulation, is a foundation of successful use of CAM software for production on CNC machines.
Postprocessor & ISV kit for Grob 5 axis
Postprocessor & ISV kit for Yasda 5 axis
NC-code simulation in NX CAM
"Before NCmatic we had a very hard time getting advanced postprocessor and simulation kits built correctly, on time and for the quoted budget. Marek Pawlus is excellent at his skill set and provides top level support. I would recommend NCmatic to any company who uses NX and wants a kit done right” Dennis Rathi, the General Manager at Creations Unlimited
- Creations Unlimited -
Our sample implementations:
5-axis universal machining center with Sinumerik 840D sl controller.
Postprocessor uses CYCLE800 transformation for 3+2 machining and TRAORI mode for full simultaneous 5-axis machining.
5-axis vertical machining center with Fanuc 31i controller.
Postprocessor uses G68.2 transformation for 3+2 machining and G43.4 mode for full simultaneous 5-axis machining.
Okuma Multus B550
Dual-spindle multifunction turning center with OSP-300 controller.
Postprocessor and ISV kit covers all machining modes (on main- and sub-spindle):
– turning at any B-axis angle
– 3+2 milling with G127 (slant machining mode)
– 5-axis simultaneous milling
– front face machining using XYZ and G137 (XZC mode)
– programming NC controlled steady rest
– sub-spindle can work in tailstock mode
– programming workpiece takeover
5-axis vertical machining center.
Postprocessor uses G254 (Dynamic Work Offset) for 3+2 machining and G234 (Tool Center Point Control) for full simultaneous 5-axis milling.
Integrated Simulation and Verification covers all machining modes and collision detection also during tool change routine
Examples with this postprocessor and ISV kit:
TOS WHR 13 Q
Horizontal machining center with replaceable heads and HEIDENHAIN iTNC 530 controller.
Postprocessor and ISV covers all machining modes using 8 cnc controlled axes.
Fidia G 996 RT
5-axis vertical machining center with Fidia C20 controller.
Postprocessor uses G21 transformation for 3+2 machining and G196 ROTO “RTCP on rotary table” mode for full simultaneous 5-axis machining.
Interesting feature is that 5-axis drilling cycles use virtual quill (W axis)
Doosan Lynx 220LSYC
Millturn machining center with Fanuc controller.
Postprocessor handles all machining modes, like:
– XYZC milling
– XZC milling with G12.1 transformation
– machining on main- and sub-spindle
– workpiece takeover operation